| Calibration |
Range /Capacity /L.C. |
Accuracy |
ULM-600
Make: Carl Zeiss
Range
Used for Calibration of Thread Ring Gauge, Plain
Ring Gauge Etc.
|
Ext.450mm Internal 380 mm L.C.0.0001mm |
0.0005mm |
|
Range :0-10mm
L.C.0.0001mm
|
Accuracy:0.5µm |
|
Range :0-12.5mm
L.C.0.0001mm |
Accuracy
0.5µm |
|
Range : X- 150mm Y- 150 mm
L.C.: 0.005mm |
- |
|
Capacity 50Nm
L.C.0.01Nm
|
Accuracy Class 0.5
|
|
Range:±1.5mm
L.C.0.005mm/meter
|
Accuracy: 0.010mm/met.
|
|
- |
- |
Slip
Gauge Set Grade ‘0’ M46/
M88
Used for Calibration of
- Snap Gauges,
- Plain Plug Gauges With Comparator
- Depth Micrometer,
- Depth Vernier Caliper
- Micrometer
|
- |
- |
Caliper checker
Make:- Mikronix |
0-600 mm |
+/-0.004 mm |
Slip
Gauge Set
Make:- Mikronix |
M46 grade 0 |
As per IS |
Slip Gauge Set
Make:- Mikronix |
M10 Grade 0 |
As per IS |
Micro Indicator
Make:-Solartron UK |
0-25/0.00005 |
0.0004 mm |
Comparator Stand
Make:-Mikronix |
0-175 mm |
- |
Floating Carriage Diameter
measuring machine
Make:-Micron |
2-100. |
- |
Dial calibration Tester
Make:-Our Own Design using solartran micro indicator |
0-25/0.0001 |
0.0004mm |
Slip Gauge Accessories
set
Make:-VIS poland |
- |
- |
Sine Setting device
Make:-UNITY |
0-90 degree |
- |
Surface plate
Make:- GMT |
450x450x150 |
Grade 0 |
| Horizontal
Metro Scope |
0-480/0.0001 mm |
+/- 0.0004 mm |
| Profile Projector |
300 mm Screen Dia |
- |
| Shore "A", Shore "D" Hardness
Tester Calibrator |
100
Shore "A", "D" units |
- |
| Torque Range Tester |
0-550 NM |
1.5% |
| Pressure Gauge Calibrator |
0-400 Kg/Cm2 |
- |
Process Calibrator
Make :- Fluck |
- |
- |
